BTSM-6100 Digital Satellite Receiver/Multiplexer

 
   
  
 
Features
Totally conform to MPEG-2/DVB standard
Support up to 6 DVB-S RF signal demodulated and the Transport Stream re-multiplexing
Support to input another TS by ASI and re-multiplex
Loop interface for each RF input
User can define the SI/PSI (include PAT, PMT, PID etc)
Rebuild PCR, and the PCR Jitter ≤±80ns
Filter the Null packet automatically
Support most of the Condition Access system
Output Interface: ASI (or DS3)
Modular design makes upgrade and re-configuration easily.
Ethernet interface for communication with manage system and SI generator
 

Specification:
 

RF Input
  75ohm, F Connector ×6
  RF frequency range: 950-2150MHz
  RF level: -65dBm~-25dBm
  LNB feed: 13V/18V, 22 kHz
TS Output
  DVB-ASI ×2, BNC 75ohm, bit rate range: 1.5~108Mbps (±10ppm)
  DS3/E3, 34.368Mbps/44.736Mbps
Control
  Front panel/RS-232
Dimensions
 

1U height, 19” wide

  4.4×48.3×38.0cm
Power
 

Voltage 160-260VAC, Frequency 47-63Hz

 

-48VDC/24VDC/12VDC (optional)

 

Power Consumption: 3W per Encoder modular; 6W Multiplexer modular

Environment
 

Temperature

 

  Operating: 0?-40? C

 

  Storage: -10?-60? C

 

Humidity

    20%-90%

 Back to Bluetop Main Page    |    Back to Testech Home Page    |    Compiler    |     RTOS    |    Emulator/Debugging