The EAGLE Layout Editor is an easy to use, yet powerful tool for designing printed circuit boards (PCBs). The name EAGLE is an acronym, which stands for

Easily Applicable Graphical Layout Editor

The program consists of three main modules

• Layout Editor
• Schematic Editor
• Autorouter
• Version 4.1

which are embedded in a single user interface. Therefore there is no need for converting netlists between schematics and layouts.

Program Features (Professional Edition)

General

• online Forward- and Back-Annotation
• context sensitive help function
• no hardware copy protection!
• multiple windows for board, schematic and library
• powerful User Language
• integrated text editor
• available for Windows 95/98/NT4/2000 und Linux

Layout Editor

• maximum drawing area 1.6 x 1.6m (64 x 64 inch)
• resolution 1/10,000mm (0.1 micron)
• up to 16 signal layers
• conventional and SMT parts
• comes with a full set of part libraries
• easily create your own parts with the fully integrated library editor
• undo/redo function for ANY editing command, to any depth
• script files for batch command execution
• copper pouring
• cut and paste function for copying entire sections of a drawing
• design rule check

Schematic Editor

• up to 99 sheets in one shematic
• electrical rule check
• gate- and pinswap
• create a board from a schematic with a single command

Autorouter

• ripup&retry router
• up to 16 signal layers
• routing strategy driven by user definable cost factors

CAM Processor

• Postscript
• pen plotters
• Gerber plotters
• Excellon and Sieb&Meyer drill files
• configurable through ASCII file for easy definition of your own output devices

System Requirements

• PC 586 (or higher)
• Windows 95/98/NT4/2000 or Linux kernel 2.x (or higher)
• Mouse
• at least 32MB RAM
• harddisk with at least 20MB free space