Built to be rugged and reliable, the C3 Chemical Metering Pumps have oversized PVDF double ball valves, a priming/degassing valve built into the PVDF pump head and a weather resistant housing made of durable, powder coated aluminum.  Another great feature is the built-in Diaphragm Failure Detection system (DFD), which senses chemical leakage in the chemical metering pump head and shuts off the pump before you have a troublesome chemical spill.  The DFD system also triggers a relay that may be connected to an external alarm or autodialer.  The C3 Chemical Metering Pumps also accept the Flow Verification System (FVS).  The optional FVS Micro-Flow device will shut down the chemical metering pump and trigger an alarm if the flow of chemical stops because of an empty tank, clogged valve or anything that might prevent the flow of liquid through the pump system.

Each CHEM-PRO C3 Chemical Metering Pump ships complete with a priming valve/pressure relief valve (located on pump head), pump head adapters, foot valve/strainer with 1/2” ceramic ball and 1/2” barbed adapter, injection/check valve fitting with 1/2” ceramic ball and one 1/2” barbed adapter, 10 feet of 1/2” clear PVC suction tubing, and mounting brackets with screws.

IMPORTANT NOTE:  Always check for chemical compatibility with the wet end materials before ordering a chemical metering pumps .

Digital Chemical Metering Pumps Specifications

General Specifications
Max. working pressure: 175 psig (12.1 bar)
Max. fluid temperature: 130 F (54 C)
Max. ambient temperature: 14 to 115 F (-10 to 46.1 C)
Output adjustment range: 5-100% in 1% increments
Duty cycle: Continuous
Maximum viscosity: 1,000 Centipoise
Maximum suction lift: 15 ft. Water, 0 psig (4.5 m, 0 bar)
Enclosure: NEMA 4X, (IP66)
Approximate shipping wt: 29 lb
Dimensions: 13 1/8” (322.7mm)W x 9”H (228mm)H x 8” (203.2mm)D