Designed for modularity and versatility, the TX100/200 series, adjustable insertion turbine flow sensors, have a current-sinking pulse output, which can be combined with the appropriate transmitter or indicator depending on the application.  For rate and total display the FT415 or FT420 flow indicator can be mounted directly on the TX100/200 series adjustable insertion turbine flow sensors.  For a 4-20mA analog output only, the AO55 blind 4-20mA converter can be mounted directly onto the meter.  If the TX100/200 series, adjustable insertion turbine flow sensors, are being used with a programmable controller, the output signal can be fed direct with no other conditioning required.

The installation fitting of the TX100/200 series adjustable turbine flow sensor is standard 1-1/2" male NPT, and can be directly threaded into ordinary saddles or threaded weld fittings.  A depth adjustment system allows two basic sizes to cover pipe sizes from 3" to 48".

Adjustable Turbine Insertion Flow Sensors Specifications

Accuracy: +1% of full scale
Flow Range: 0.2 - 30 ft/sec (.06 - 9.14 m/sec)
Sensor/Output: Hall Effect Sensor - 12 VDC current sinking pulse