The T-mount F-1000 Paddle Wheel Flow Meters are available in sizes from 3/8" to 2" and come with standard male pipe threads.  The saddle-mount Paddle Wheel Flow Meters fit any pipe with a wall thickness equal to schedule 40 or schedule 80 pipe, with models for diameters from 1-1/2" to 6".  Quick and easy installation is accomplished by simply drilling a 1-1/8" hole in the pipe and strapping the Paddle Wheel Flow Meter on with the included hardware.  Each F-1000 Paddle Wheel Flow Meters are pre-calibrated for a specific pipe size and wall thickness, so it is ready to install right out of the box.  All necessary mounting hardware and batteries are included with the Paddle Wheel Flow Meter.

NOTES:
1. F-1000 Paddlewheel Flow Meters are available in LPM and metric pipe sizes – call for availability.
2. Always check for chemical compatibility before using the Paddlewheel Flow Meters or any other flowmeter with a liquid other than clean to slightly turbid water.

Paddlewheel Flow Meters Specifications

Accuracy: +/-2% full scale
Display: 6-digit LCD, rate and total
Max pressure: 300 psig (20.7 bar) @ 70deg F (20.7 deg C)
Max fluid temp @ 0 psi
     T-mount: 200°F (93deg C)
     Saddle-mount: 140°F (60deg C)
Materials
     Sensor body/paddle/axle: PVDF
     Mounting T: Polypropylene
     Mounting saddle: 1 1/2” to 3”: PVDF, 6” to 10”: PVC
     O-Rings: Viton®
Power: Two AAA batteries (included)
Battery life: 1-year minimum
Enclosure: NEMA 4X, ABS
Dimensions: See illustration