|
Wireless Dataloggers Description
The
iRIS 220 Wireless Dataloggers are fully-featured
dataloggers with onboard GPRS modems, providing a
complete wireless datalogging and remote data monitoring
solutions in a single package. The wireless datalogger
software can be customized to suit a variety of specific
applications and the wireless datalogger can be
connected to a wide range of instrumentation. In
addition to the wireless datalogger’s cellular modem,
the iRIS 220 wireless datalogger has an external RS232
port which allows it to be directly connected to a
laptop, PC, intelligent instruments and data radios.
Cellular Modem
The iRIS 220 wireless datalogger includes a high
performance GSM/GPRS modem for remote data acquisition.
This enables high-speed remote data transfer virtually
on demand. Extensive software options have been
included to make the connection scenarios for the
wireless dataloggers very flexible and to minimize data
traffic. Logged data can be retrieved over the Internet
from the wireless datalogger via the internal GPRS
modem. Wireless datalogger data unloads can be
scheduled, triggered by alarm conditions or input
criteria, and solicited by a remote device (e.g.
computer running iLink or HydroTelTM 2000).
Configuration
The iRIS 220 wireless datalogger is configured using
standard terminal software such as HyperTerminalTM. No
special software is required as all menus and
configuration settings are generated and displayed
directly by the wireless datalogger itself.
Configuration can be carried out locally via the RS232
connection or remotely using the cellular GPRS modem in
exactly the same manner.
Wireless Dataloggers Specifications
Wireless Dataloggers
Memory: Non-volatile 2MB flash storage of 262,144
time/date stamped data points. Circular buffer mode
(overwrites oldest data when memory is full), lithium
battery backup.
Resolution: 12-Bit
Processor: 100MHz microcontroller, 4MB flash
memory (program and data storage)
Channels: 4-Analog (0-5V), 2-Digital Inputs
(30Vdc Max In), 2-Digital Outputs (Open drain pull down,
max 300mA @ 30V)
Clock: Real time clock and calendar.
Power Supply: External regulated 12V dc power
supply or rechargeable sealed lead-acid battery.
Charger Source - External 15-30V dc supply. Supports a
directly connected solar panel (no regulator)
Current Draw: Less than 3mA@12V in standby mode.
Actual current draw depends on power management mode and
wireless modem state
Operating Temperature: 14 to 158°F (-10 to 70°C)
Storage Temperature: -4 to 185°F (-20 to 85°C)
Enclosure: Lightweight powder coated aluminum.
This provides mechanical strength and EMF shielding and
incorporates 4 x M4 mounting holes.
Size: 4”x6-3/4”x1-1/2” (WxHxD)
Weight: 1 lb
Wireless Dataloggers Options
|
iRIS 220 Wireless Datalogger |
|
|
FP0500
Wireless Datalogger Enclosure Kit W/ AC Charger
Includes heavy-duty rugged, lockable enclosure, AC
charger, smart charger, 12V 4.5Ah battery.
|
|
|
FP0550
Wireless Datalogger Enclosure Kit W/ Solar Panel
Includes heavy-duty rugged, lockable enclosure, 5W
300mA min. solar panel, smart charger, 12V 4.5Ah
battery. |
|
|
FP0600
Wireless Datalogger Antenna Kit
NOTE: For GPRS modem wireless Internet telemetry
only. |
|
|
Internet
Cellular Service
Access your cellular datalogger via the internet.
|
|
|
|
OTHER
REMOTE DATALOGGING INSTRUMENTS |
GL500 Datalogger, 9-Channel
Features 7 analog channels and 2 pulse channels.
With weather proof enclosure and 12V battery.
|
|
|
SIT65
Remote Wireless Data Acquisition System
For remote data collection in remote areas where
cellular coverage is not available. |
|
 |
iRIS 350 SDI-12 Wireless Dataloggers
Includes 4-Analog inputs, 4-Digital I/O, SDI-12 Bus
for 10 SDI-12 sensors, and internal modem. |
|
|
EBI-20-T-Set Temperature Datalogger Kit
Includes EBI-20-T datalogger, Winlog.basic software,
EBI-20 interface, and USB cable. |
|
 |
|
EBI-85 A-OE Temperature Data Logger
|
|
