The WS750 wastewater/stormwater sampler's state of the art controller gives you complete control over your wastewater/stormwater sampling process.  With the wastewater/stormwater sampler's sample size control, you can take individual time-weighted composite samples or full-bottle discrete grab samples.  The wastewater/stormwater sampler's sample interval control allows you set the time between individual composite samples or enable the external trigger mode.  A start delay timer allows you to start multiple wastewater/stormwater samplers in the field at the same time, or to delay drawing a wastewater/stormwater sample after a triggering event so that your sample better represents the water source.  An automatic15 second backflush cycle clears any debris from the wastewater/stormwater sampler's strainer and empties the water from the hose so the next sample is not contaminated.

A unique feature of the WS750 stormwater/wastewater samplers is the ability to set the sampling mode for each pump and bottle individually.  This allows you to take two individual time-weighted or flow proportional composite samples, or you can set the stormwater/wastewater samplers to take full-bottle discrete (grab) samples, or you can set the stormwater/wastewater samplers to take a full-bottle discrete (grab) sample in one bottle and a time-weighted or flow proportional composite sample in the other.  In the case of two composite samples you can have different size settings for each pump.

The WS750 stormwater/wastewater samplers are easy to set up in the field.  The stormwater/wastewater samplers rugged rainproof enclosure can be padlocked and/or chained to prevent tampering.  The stormwater/wastewater samplers are enclosed in a relatively small case that can be easily hidden or camouflaged to prevent vandalism.  The stormwater/wastewater sampler's is lightweight enough that even with a full sample bottle it can be suspended in a manhole for stormdrain or sewer sampling.

The WS750 wastewater/stormwater samplers come with two 1-gallon polyethylene sample bottles for collecting composite samples, two peristaltic sampling pump, a circuit board controller, and a rechargeable gel cell battery.  Also provided are two sample pickup hoses and a battery charger.  Everything you need is provided for a successful wastewater management or environmental monitoring program.

Low Power
The composite/discrete water sampler's 5 AH rechargeable battery will power the sampler for several months or a half hour of continous sampling with both pumps.

Overflow Protection
The wastewater/stormwater sampler's sample bottles are each equipped with a float switch that automatically turns off the peristaltic sampling pump if the water bottle becomes full.

Sample Size
The user can adjust the wastewater/stormwater sampler's peristaltic pumps individually to one of 15 composite sample sizes from 50ml to 2 liters plus a full bottle discrete setting.  The wastewater/stormwater sampler's peristaltic pumps can be set to a single sample time interval from 5 min. to 12 hours plus an external trigger mode setting for flow proportional sampling.

Flow Proportional Sampling
An external pulse-type flow meter can control the water sample interval for true flow proportional sampling.  Global Water's Open Channel Flow Monitor has a flow-proportional output signal for triggering the WS750 wastewater/stormwater samplers.  If you already have a flow meter but it has a 4-20mA output.

Stormwater/Wastewater Samplers Specifications

Operating Temperature: 0° to +70°C
Size of unit: 22”H X 17"W X 9"D
Weight: 22lb (Shipping Weight 24lb)
Materials:
     Enclosure: Expanded UV protected PVC
     Bottles: Two 1 gallon Polyethylene
     Pickup Hose: 15' reinforced PVC 1/4" ID polyethylene flexible tubing section with intake strainer
     Pump Tubing: Norprene 1/4" ID, 7/16” OD
Sample Pump:
     Flow Rate: 1000 ml per minute at a 4 foot head
     Type: Peristaltic
     Maximum Lift: ~20 feet
Battery: Rechargeable 5 AH Gel Cell
Battery Life:
     One Pump running: ~1 hour      Two Pumps running: ~ ½ hour
     Standby: 3 months while still retaining enough power to run the pump to capacity
Start Delay: 16 time settings from 0 to 12 hours
Composite Interval: 15 time settings from 5 min. to 12 hours plus an External Trigger mode setting
Sample Size: 15 composite sample sizes from 50ml to 2 liters plus a Full Bottle discrete setting (Approximate sizes at 4 foot head)
External Trigger Input: 250mS minimum pulse width
     Switch closure or 4-30VDC
Pulse Output: 5VDC one-second pulse
     1000ohm output impedance
Bottle Switch Input: Switch closure Input
     Floating read switch in bottle
Rain and Water Sensors: Optional moisture sensors or switch closure inputs
Internal Fuse: 10A Slow-Blow