IAR KickStart Kit for AME-51
(Part Number: KSK-AME-51-PL)
Starter kit for Oki Semiconductor 4050/4060 series
Starter kit for Oki AME-51
 

A flying start
Development kits from IAR Systems provide you with all the tools you need to develop embedded applications right out of the box.
Overview

IAR KickStart Kit for the Oki Semiconductor 4050/4060 Series ARM7TDMI-based microcontrollers contains all the necessary hardware and software and allows you to design, develop, integrate and test your applications:

• AME-51 development board from Oki Semiconductor
• IAR Embedded Workbench with a 32KB edition of IAR C/C++ Compiler (including example projects)

• IAR J-LINK JTAG debugger 

Included hardware

AME-51 development board
AME-51 Development board

 

 

 

 

 

 

 
IAR J-Link JTAG Debugger
IAR J-Link-KS for ARM
 
AME-51 Development board from Oki Semiconductor
• ML67Q4051 MCU
• 1MB SRAM with remap logic
• 20-pin JTAG interface connector
• Power LED
• Three user LEDs
• 7-segment user LED
• RS232 drivers
• Two UART DB9 connectors (DCE and DTE)
• One SPI port
• One I2C port with Temperature sensor
• Potentiometer connected to ADC
• Powered through USB port via J-Link
• Optional external power supply
• Optional External oscillator
• 32.768 MHz main clock crystal
• 32.768 kHz sub clock crystal
• 2 user push buttons
• Reset button
• 8 Position DIP Switch
• Expansion (ADA) connectors
• Dimensions: 127x105 mm (5.0x4.125")

IAR J-Link for ARM

IAR J-Link for ARM is a small JTAG/SWD hardware debug probe; it connects via USB to the PC host running Windows. IAR J-Link integrates seamlessly into IAR Embedded Workbench and is fully plug-and-play compatible:

• Any ARM7/ARM9/ARM11/Cortex-M3 core supported, including both JTAG and SWD.
• Download speed up to 600 KB/sec *
• DCC speed up to 800 KB/sec *
• Seamless integration into IAR Embedded Workbench
• No power supply required, powered through USB
• Max. JTAG speed 12 MHz
• Automatic core recognition
• Auto speed recognition
• All JTAG signals can be monitored, target voltage can be measured
• Support for multiple devices on scan chain
• Fully plug and play compatible
• 20-pin standard JTAG connector
• USB and 20-pin flat cable included
• Wide target voltage range: 1.2V - 3.3V, upto 5V with optional adapter.

* Measured with ARM7 at 50 MHz, 12MHz JTAG speed.

Included software

IAR Software CD
 
IAR Embedded Workbenchฎ for ARM
IAR Embedded Workbench is an Integrated Development Environment with a complete and easy-to-use set of C/C++ cross compiler and debugger tools for professional embedded applications.

• KickStart 32KB IAR C/C++ Compiler for ARM
• Project manager
• Editor
• Linker and librarian tools
• C-SPYฎ debugger
• Full integration with IAR J-Link

Complete upgrade path available from IAR Systems.

  Back to IAR Home Page    Back to Testech Home Page   Compiler     RTOS    Emulator/Debugging