IAR KickStart Kit for LPC2129
(Part Number: KSK-LPC2129)
Starter Kit for LPC2129
LPC2129 Development Kit
 

A flying start
Development kits from IAR Systems provide you with all the tools you need to develop embedded applications right out of the box.
Overview

IAR KickStart Kit for LPC2129 contains all the necessary hardware and software and allows you to develop and test your applications:

• LPC2129 development board from Olimex
• IAR Embedded Workbench with a 32KB edition of  IAR C/C++ Compiler (including example projects)

• IAR J-LINK JTAG debugger 

Included hardware

LPC2129 Development Board
LPC2129 Development Board

 

 

 

 

 

 

 

 

 

 
IAR J-Link JTAG debugger
IAR J-Link for ARM
LPC2129 Development board from Olimex
• MCU: LPC2129 16/32 bit ARM7TDMI-S with 256K Bytes Program Flash, 16K Bytes RAM, RTC, 4x10 bit ADC 2.44 uS, 2xCAN, 2xUARTs, I2C, SPI, 2x32bit TIMERS, 7xCCR, 6xPWM, WDT, 5V tolerant I/O, up to 60MHz operation
• Standard JTAG connector with ARM 2x10 pin layout for programming/debugging with ARM-JTAG
• Three on board voltage regulators 1.8V, 3.3V and 5V with up to 800mA current
• Single power supply: +7-9VDC required
• Power supply status LED
• Power supply filtering capacitor
• Two channel RS232 interface with two RS232 SUB-D 9 pin connectors
• Two channel CAN interface with drivers and two SUB-D 9 pin connectors
• iButton interface circuit
• Frequency input connector
• Two buttons
• Two status LEDs
• Potentiometer connected to AIN
• RESET circuit with external control of the NXP ISP utility via RS232
• RESET button
• DBG jumper for JTAG enable
• BSL jumper for bootloader enable
• JRST jumper for enable/disable external RESET control by RS232
• 10 Mhz crystal
• Extension headers for all uC ports
• PCB: FR-4, 1.5 mm (0,062"), green soldermask, white silkscreen component print
• Dimensions: 115x80 mm (4.5x3.2")
• Schematics included
• RoHS compliant

IAR J-Link for ARM

IAR J-Link for ARM is a small JTAG/SWD hardware debug probe; it connects via USB to the PC host running Windows. IAR J-Link integrates seamlessly into IAR Embedded Workbench and is fully plug-and-play compatible:

• Any ARM7/ARM9/ARM11/Cortex-M3 core supported, including both JTAG and SWD.
• Download speed up to 600 KB/sec *
• DCC speed up to 800 KB/sec *
• Seamless integration into IAR Embedded Workbench
• No power supply required, powered through USB
• Max. JTAG speed 12 MHz
• Automatic core recognition
• Auto speed recognition
• All JTAG signals can be monitored, target voltage can be measured
• Support for multiple devices on scan chain
• Fully plug and play compatible
• 20-pin standard JTAG connector
• USB and 20-pin flat cable included
• Wide target voltage range: 1.2V - 3.3V, upto 5V with optional adapter.

* Measured with ARM7 at 50 MHz, 12MHz JTAG speed.

Included software

IAR Software CD
IAR Embedded Workbenchฎ for ARM
IAR Embedded Workbench is an Integrated Development Environment with a complete and easy-to-use set of C/C++ cross compiler and debugger tools for professional embedded applications.

• KickStart 32KB IAR C/C++ Compiler for ARM
• Project manager
• Editor
• Linker and librarian tools
• C-SPYฎ debugger
• Full integration with IAR J-Link

Complete upgrade path available from IAR Systems.

  Back to IAR Home Page    Back to Testech Home Page   Compiler     RTOS    Emulator/Debugging