IAR KickStart Kit for LPC2129E
(Part Number: KSK-LPC2129E-PL)
Starter Kit from IAR
 

A flying start
Development kits from IAR Systems provide you with all the tools you need to develop embedded applications right out of the box.
Overview

IAR KickStart Kit for LPC2129E contains all the necessary hardware and software and allows you to develop and test your applications:

• LPC2129E development board from Olimex
• IAR visualSTATE evaluation edition, 20-state limitation
• IAR Embedded Workbench with a 32KB edition of IAR C/C++ Compiler (including example projects)

• IAR J-LINK JTAG debugger

Included hardware

LPC2129E Development Board
LPC2129 Development Board with Ethernet interface

 

 

 

 

 

 

 

 

 

 
IAR J-Link
IAR J-Link for ARM
LPC2129E Development board from Olimex
• MCU: LPC2129 16/32 bit ARM7TDMI-STM with 256K Bytes Program Flash, 16K Bytes RAM, RTC,4x 10 bit ADC 2.44 uS, 2x UARTs, I2C, SPI, 2x 32bit TIMERS, 2x CAN, 7x CCR, 6x PWM, WDT, 5V tolerant I/O, up to 60MHz operation
• CS8900 Ethernet interface
• Two general purpose buttons
• Potentiometer connected to analog input 0
• Dallas i-button interface
• 24LC515 EEPROM for external web storage
• Standard JTAG connector with ARM 2x10 pin layout for programming/debugging with ARM-JTAG
• Two on board voltage regulators 1.8V and 3.3V with up to 800mA current
• Single power supply: +5VDC required
• Three LAN status LEDs, three general purpose status LEDs
• Power supply filtering capacitor
• USB to RS232 interface
• RESET circuit with external control of Philips ISP utility via USB/RS232
• RESET button
• DBG jumper for JTAG enable
• BSL jumper for bootloader enable
• JRST jumper for enable/disable external RESET vontrol by RS232
• 14.7456 Mhz crystal
• Extension header for all uC ports
• PCB: FR-4, 1.5 mm (0,062"), green soldermask, white silkscreen component print
• RoHS compliant
• Dimensions: 80x90 mm (3.15x3.55")

IAR J-Link for ARM

IAR J-Link for ARM is a small JTAG/SWD hardware debug probe; it connects via USB to the PC host running Windows. IAR J-Link integrates seamlessly into IAR Embedded Workbench and is fully plug-and-play compatible:

• Any ARM7/ARM9/ARM11/Cortex-M3 core supported, including both JTAG and SWD.
• Download speed up to 600 KB/sec *
• DCC speed up to 800 KB/sec *
• Seamless integration into IAR Embedded Workbench
• No power supply required, powered through USB
• Max. JTAG speed 12 MHz
• Automatic core recognition
• Auto speed recognition
• All JTAG signals can be monitored, target voltage can be measured
• Support for multiple devices on scan chain
• Fully plug and play compatible
• 20-pin standard JTAG connector
• USB and 20-pin flat cable included
• Wide target voltage range: 1.2V - 3.3V, upto 5V with optional adapter.

* Measured with ARM7 at 50 MHz, 12MHz JTAG speed.

Included software

IAR Software CD
IAR visualSTATEฎ
IAR visualSTATE is a UML-compliant graphical design environment for reactive systems, with advanced formal verification and validation tools as well as a very powerful code generator.

visualSTATE represents any complex reactive system with UML state machines. The use of state machine diagrams is exceptionally beneficial for control logic oriented applications such as monitoring, metering and control applications where reliability, size and deterministic execution are the main criteria, which makes visualSTATE the ideal design tool for ARM-based projects.

IAR Embedded Workbenchฎ for ARM
IAR Embedded Workbench is an Integrated Development Environment with a complete and easy-to-use set of C/C++ cross compiler and debugger tools for professional embedded applications.

• KickStart 32KB IAR C/C++ Compiler for ARM
• Project manager
• Editor
• Linker and librarian tools
• C-SPYฎ debugger
• Full integration with IAR J-Link

Complete upgrade path available from IAR Systems.

  Back to IAR Home Page    Back to Testech Home Page   Compiler     RTOS    Emulator/Debugging