IAR KickStart Kit for MSP430-169
(Part Number: KSMSP430169)
Starter kit for MSP430F169
MSP430F169 development kit
 

A flying start
Development kits from IAR Systems provide you with all the tools you need to develop embedded applications right out of the box.
Overview

The starter kit for MSP430F169 contains all the necessary hardware and software and allows you to design, develop, integrate and test your applications:

• MSP430F169 development board from Softbaugh
• IAR Embedded Workbench with 4KB edition of the C/C++ compiler for MSP430 (including example projects)
• MSP430 USB Debug Interface

Whether you are a novice or seasoned developer, you will find IAR KickStart Kit a tremendous time-saver.

Included hardware

MSP430F169 Development board
MSP430F169 development board
MSP430 USB Debug Interface
MSP430 USB Debug Interface
MSP430F169 Development Board from Softbaugh


• TI MSP430F169 flash processor
• Texas Instruments RS232 interface using the MAX3221
• Adjustable TPS7201 LDO for benchtop use
• One-cell power supply based on the TPS60310 (3.3V from one AA or AAA battery)
• CR2032 coin cell supply and optional 3.3v capacitive charge pump
• JTAG header
• Bootload header, perfect for use with our BLMSPF (not included).
• 4 Green User LEDs
• 2 User switches
• Every MSP port pin exposed at IDC headers
• Large prototyping area
• Roomy 2MB SST Serial flash for data logging applications
• DAC7512 12-bit low-power serial DAC

Included software

 

IAR Systems software CD
 
IAR Embedded Workbenchฎ for MSP430

IAR Embedded Workbench is an Integrated Development Environment with a complete and easy-to-use set of C/C++ cross compiler and debugger tools for professional embedded applications. 

• KickStart 4KB C/C++ compiler for MSP430
• Project manager
• Editor
• Linker and librarian tools
• C-SPYฎ debugger

MSP430 USB Debug Interface

• Supports both JTAG and Spy-Bi-Wire (2-wire JTAG) debug protocols, fully compatible with IAR Embedded Workbench for MSP430
• USB cable and 14-conductor target cable included
• Full documentation on CD ROM
• Technical specifications:
- Software Configurable supply voltage between 1.8 and 5 volts at 100mA.
- Can burn JTAG Security Fuse.
- Backward compatible with existing FET tools and JTAG boards.

  Back to IAR Home Page    Back to Testech Home Page   Compiler     RTOS    Emulator/Debugging