• Preloaded with DOS & Flash File System
  • 33MHz 186 Compatible Processor
  • 512K Flash, 512K DRAM
  • 32 Pin Dip Socket to accept M-Systems DiskOnChip
  • 44 Digital I/O Lines
  • 2 Serial Ports, 1- RS232, 1- RS232 (3-wire) / RS232 (TTL) / RS485
  • Console / Debug Port
  • Watchdog & (2) 16 bit Timers
  • 7-34V DC or 5V Power
  • Dimensions 4.2" x 3.6"
 

The Flashlite 186 is a cost-effective alternative for data acquisition, communications and industrial control applications.

Built around a 33MHz 186 compatible processor, the Flashlite 186 controller offers 44 configurable digital I/O lines, 512K DRAM and 512K Flash memory, two serial ports and a console/debug serial port. Additional features include an onboard 7-34V DC voltage regulator, two 16-bit timers, a watchdog timer, I/O expansion port, as well as a socket to expand non-volatile memory using M-Systems DiskOnChip.

Like all members of the JK microsystems family of controllers, the preloaded, royalty-free DOS and flash file system provide a fast, yet comfortable environment for embedded development. By connecting the Console/Debug serial port to a PC and running a telecommunications program, engineers can immediately upload and execute programs on the Flashlite 186 platform while having both hardware serial ports available for the user’s application.

Additional features include the use of JK microsystems peripherals for flexible I/O expansion. The Flashlite 186 supports the addition of LCDs, keypads, 12-bit A/D channels, relay outputs, optically isolated inputs or high current drivers.

The Flashlite 186 Development Kit (99-0080) includes Flashlite 186 single board computer, Console Cable, Connector Kit, 110 VAC Adapter, Setup guide, Schematic and CD with Borland C/C++ V4.52 Compiler, documentation and serial driver libraries. (220Vin Development Kit 99-0081 available.)

Development Service: Testech Electronics provides cost effective development service for a full turnkey solutions to assist our customer with automating or customised  project using JKMicro controller. We help you to implement your ideas and solve your problem quickly. Contact us at sales@testech-elect.com or cal +65-67492162 for a discussion of our cost effective total solutions.

RTOS Support: Micrium UCOS-II has been ported to the Flashlite186


 

Connectors and Jumpers

J1 Processor Bus
J2 Power (7-34V DC unregulated)
J3 Power (5V DC regulated)
J5 RS485 / TTL RS232
J6 Serial Console/Debug port
J7 Digital I/O Ports A and B
J8 Serial Port 1
J9 Digital I/O Ports C and D
J10 Serial Port 0
J11 Digital I/O Ports E and F

Specifications

Processor 33MHz 186 Compatible Processor
Operating System XDOS(MS/PC DOS 3.3 compatible)
Memory 512K DRAM, 512K Flash
Serial Port 1 RS-232 with 3 handshake lines
115200 baud maximum
Serial Port 2 RS-232 no handshaking or
RS-232 TTL Level or
RS-485 half duplex,
115200 baud maximum
Serial Console/
Debug Port 9600 Baud
Digital I/O 44 Digital I/O
Power Requirements 7 to 34 Volts DC, or 5V DC regulated
Current Consumption 1.8 Watts, typical
Humidity 5 - 90%, non-condensing
Temperature -20 to +85 °C
Weight 2.1oz (60 gm)
Dimensions 4.20" x 3.60"
(106.7mm x 91.4mm)

Processor I/O Pin (PIO 0, PIO 1, PIO 10, PIO 11) Characteristics

Symbol Parameter MIN MAX Units Condition
VIL Input Low -0.5 0.8 V
VIH Input High 2.0 Vcc+0.5 V
VOL Output Low 0.4 V IOL= 6mA
VOH Output High 2.4 V IOH= -6mA


Ports A, B, C, D, E, F

Symbol Parameter MIN MAX Units Condition
VIL Input Low 0 0.8 V
VIH Input High 2.0 5.5 V
VOL Output Low 0.4 V IOL= 8mA
VOH Output High 2.4 V IOH= -4mA

Mating Connectors

Connector Mfg MFG P/N JK micro P/N
J6,J7,J8,J10 (2x5) Molex 22-55-2101
Oupiin 4072-2X05H 28-0030
J9,J11 (2x13) Molex 22-55-2261
Oupiin 4072-2X013H 28-0031
Pins (for 2x5,2x13) Molex 16-02-0096
Oupiin 4072-PIN-T 28-0033
J3 (1x3) Molex 22-01-2031
Oupiin 4071-3H 28-0012
J5 (1x5) Molex 22-01-2051
Oupiin 4071-05H 28-0036
Pins (for 1x3,1x5) Molex 08-50-0114
Oupiin 4071-PIN-T 28-0013

Optional Features


 Back to JKMicro Product Page    |      Back to Testech Main Page

[contact.htm]