MaxStream development kits provide inexpensive means of experiencing first-hand the best in
wireless data communications and support. The kits include the hardware and software needed
to rapidly create and test long range wireless data links.

International

• XBee Professional Developer Kit: XB24-PDK
• XBee-PRO Starter Kit: XBP24-DKS
• XBee Starter Kit: XB24-DKS

30-Day Satisfaction Guarantee
Each development kit includes free and unlimited access to MaxStream’s knowledgeable and responsive team of
RF XPerts™. MaxStream RF XPerts are available to help customize your wireless data network to meet your
specific needs. If after contacting MaxStream engineers you find the development kit does not meet your product needs,
return it in good working condition within 30-days for a full refund (less shipping & handling).

 

 

Performance
Power Output:	XBee: 1mW (0 dBm) XBee-PRO: 60 mW (18 dBm)*, 100 mW EIRP*
Indoor/Urban Range:	XBee: up to 100' (30m) XBee-PRO: up to 300' (100m)
Outdoor/RF Line-of-sight Range:	XBee: up to 300' (100m) XBee-PRO: up to 1 mile (1.6km)
RF Data Rate:	250 Kbps
Interface Data Rate:	up to 115.2 Kbps
Receiver Sensitivity:	XBee: -92 dBm XBee-PRO: -100 dBm
Networking
Spread Spectrum Type:	DSSS (Direct Sequence Spread Spectrum)
Networking Topology:	Peer-to-peer, point-to-point & point-to-multipoint
Error Handling:	Retries & acknowledgements
Filtration Options:	PAN ID, channel and addresses
Channel Capacity:	XBee: 16 Channels XBee-PRO: 12 Channels
Addressing:	65,000 network addresses available for each channel
Encryption:	128-bit AES (coming soon)
Power
Supply Voltage:	2.8 - 3.4 V
Transmit Current:	XBee: 45 mA (@ 3.3 V) XBee-PRO: 270 mA (@ 3.3 V)
Receive Current:	XBee: 50 mA @ 3.3 V XBee-PRO: 55 mA (@ 3.3 V)
Power-down Sleep Current:	<10 µA
General
Frequency Band:	2.4000 - 2.4835 GHz
Serial Data Interface:	3V CMOS UART - No configuration required
Physical Properties
Size:	XBee: 0.960" x 1.087" (2.438cm x 2.761cm), XBee-PRO: 0.960" x 1.297" (2.438cm x 3.294 m)
Weight:	XBee: 0.10 oz. (3g) XBee-PRO: 0.14 oz. (4g)
Antenna Options:	U.FL RF connector, chip antenna, or whip antenna
Operating Temperature:	-40 to 85° C (industrial)
Certifications:
FCC:	XBee: OUR-XBEE XBee-PRO: OUR-XBEEPRO
IC:	XBee: 4214A-XBEE XBee-PRO: 4214A-XBEEPRO
Europe:	ETSI
Class 1 Division 2:	Approved

* When operating in Europe: XBee-PRO Modules must be configured to operate at a maximum TX power
output level of 10 dBm (power level is set using AT commands). Additionally, European regulations stipulate
an EIRP power maximum of 12.86 dBm (19 mW).