XBee-PRO™ Zigbee/802.15.4 RS-232 RF Modem   2.4 GHz

 

 

Description Specifications Contents

 

The XBee-PRO ZigBee/802.15.4 RS-232 RF Modem provides all the benefits of the ZigBee standard in a design that yields three times the range of traditional ZigBee solutions. The 100 mW XBee-PRO provides up to one mile range (1.6km) and its RS-232 connectivity makes integration simple.

No configuration is necessary for out-of-box RF communications. The modem’s default configuration supports a wide range of data system applications. Advanced configurations can be implemented using simple AT commands.

Product summary:

  • ISM 2.4 GHz operating frequency
  • 60 mW (18 dBm), 100 mW EIRP power output (up to 1 mile range)
  • RS-232 interfacing built-in
  • RPSMA antenna
  • Industrial (-40 – 85° C) temperature rating
  • Approved for use in the United States, Canada and Europe
  • Advanced networking & low-power modes supported

All MaxStream radio modems are manufactured under ISO 9001:2000 registered standards and backed by MaxStream's one-year warranty.

Free and unlimited access to MaxStream’s knowledgeable and responsive team of RF XPerts™ is included with every radio modem sold. To experience the best in wireless data solutions and support, contact MaxStream, Inc.

 

Performance
   Power Output: 60 mW (18 dBm), 100 mW EIRP*
   Indoor/Urban Range: up to 300' (100m)
   Outdoor/RF Line-of-sight Range: up to 1 mile (1.6km)
   RF Data Rate: 250,000 bps
   Interface Data Rate: 1200 - 115200 bps
(non-standard baud rates also supported)
   Receiver Sensitivity: -100 dBm
Networking
   Spread Spectrum Type: DSSS (Direct Sequence Spread Spectrum)
   Networking Topology: Peer-to-peer, point-to-point & point-to-multipoint
   Error Handling: Retries & acknowledgements
   Filtration Options: PAN ID, channel and addresses
   Channel Capacity: 12 Direct Sequence Channels (software selectable)
   Addressing: 65,000 network addresses available for each channel
   Encryption: 128-bit AES (coming soon)
Power
   Supply Voltage: 5-14 VDC
   Transmit Current: 300 mA
   Receive Current: 80 mA
   Power-down Sleep Current: < 6 mA
General
   Frequency Band: 2.4000 - 2.4835 GHz
   Data Connection: Female DB-9
Physical Properties
   Size: 4.500" x 2.750" x 1.125" (11.4cm x 7.0cm x 2.9cm)
   Weight: 5.25 oz (150g)
   Antenna Options: RPSMA
   Operating Temperature: -40 to 85° C (industrial)
Certifications:
   United States (FCC): OUR-XBEEPRO
   Canada (IC): 4214A-XBEEPRO
   Europe (CE): ETSI
   Class 1 Division 2: Approved
 

* When operating in Europe: XBee-PRO Modems must be configured to operate at a maximum TX power output level of 10 dBm (power level is set using AT commands). Additionally, European regulations stipulate an EIRP power maximum of 12.86 dBm (19 mW).

When purchased with accessories, each XBee-PKG-R comes with the components needed to setup and test your radio modem using one or two PCs (two radio modems are required to make a wireless link).
  • (1) XBee-PRO Zigbee/802.15.4 RS-232 RF Modem
  • (1) Quick start guide
  • (1) CD with documentation and software
  • (1) 1/2 wave dipole antenna
  • (1) Serial loopback adapter
  • (1) Null modem adapter (male-to-male)
  • (1) Male RS-485/422 adapter
  • (1) Female RS-485/422 adapter
  • (1) DB-9 male to DB-9 female serial cable
  • (1) AC power adapter
  • (1) 9 volt battery adapter

 


 

  Back to MaxSystem Main Page    |    Back to Testech Home Page    |    Compiler    |     RTOS    |    Emulator/Debugging