XBee™ ZigBee OEM RF Module 2.4 GHz
 |
The XBee OEM RF module is a ZigBee/IEEE 802.15.4 compliant solution that satisfies the unique needs of low-cost, low-power wireless sensor networks. The modules are easy-to-use, require minimal power and provide reliable delivery of critical data between devices. Its small form factor saves valuable board space.
The XBee module operates within the ISM 2.4 GHz frequency band and is pin-for-pin compatible with MaxStream's XBee-PRO (60 mW) Zigbee Module. The modules are optimized for use in US, Canada, Australia, Israel and Europe.
No configuration is necessary for out-of-box RF communications. The module’s default configuration supports a wide range of data system applications. Advanced configurations can be implemented using simple AT commands.
Product summary:
- ISM 2.4 GHz operating frequency
- 1 mW (0 dBm) power output (up to 100m range)
- U.FL. RF Connector, Chip or Whip antenna options
- Industrial (-40 – 85° C) temperature rating
- Approved for use in the United States, Canada and Europe
- Advanced networking & low-power modes supported
All MaxStream radio modems are manufactured under ISO 9001:2000 registered standards and backed by MaxStream's one-year warranty.
| Performance | |
|---|---|
| Power Output: | 1mW (0 dBm) |
| Indoor/Urban Range: | up to 100' (30m) |
| Outdoor/RF Line-of-sight Range: | up to 300' (100m) |
| RF Data Rate: | 250 Kbps |
| Interface Data Rate: | up to 115.2 Kbps |
| Receiver Sensitivity: | -92 dBm |
| Networking | |
| Spread Spectrum Type: | DSSS (Direct Sequence Spread Spectrum) |
| Networking Topology: | Peer-to-peer, point-to-point & point-to-multipoint |
| Error Handling: | Retries & acknowledgements |
| Filtration Options: | PAN ID, channel and addresses |
| Channel Capacity: | 16 Direct Sequence Channels (software selectable) |
| Addressing: | 65,000 network addresses available for each channel |
| Encryption: | 128-bit AES (coming soon) |
| Power | |
| Supply Voltage: | 2.8 - 3.4 V |
| Transmit Current: | 45 mA (@ 3.3 V) |
| Receive Current: | 50 mA (@ 3.3 V) |
| Power-down Sleep Current: | <10 µA |
| General | |
| Frequency Band: | 2.4000 - 2.4835 GHz |
| Serial Data Interface: | 3V CMOS UART - No configuration required |
| Physical Properties | |
| Size: | 0.960" x 1.087" (2.438 cm x 2.761 cm) |
| Weight: | 0.10 oz (3g) - w/ U.FL. connector |
| Antenna Options: | U.FL. RF connector, chip antenna, or whip antenna |
| Operating Temperature: | -40 to 85° C (industrial) |
| Certifications: | |
| United States (FCC): | OUR-XBEE |
| Canada (IC): | 4214A-XBEE |
| Europe (CE): | ETSI |
| Class 1 Division 2: | Approved |
XBee modules are available with a PCB chip antenna, a ¼ monopole integrated whip antenna, or a U.FL antenna connector that allows for connection to a dipole or other external antenna.
The chip and integrated whip antennas are suited for any application, but are especially useful in embedded applications. Since the radios do not have any issue radiating through plastic cases or housings, the antennas can be completely enclosed in those types of applications.
The U.FL connector is used in conjunction with an adapter cable that can be connected to a dipole or gain antenna if the housing is metal or if that solution is more desirable mechanically. Range can differ somewhat with different antenna types, so that should be a consideration when choosing what type of antenna you want to use.
