XTend™ Development Kit 900 MHz
 |
Description Specifications Contents
The XTend OEM RF Module provides unprecedented performance in a low cost radio modem. MaxStream development kits contain two modules and provide an inexpensive means of experiencing first-hand the best in wireless data communications and support. The kit includes the hardware and software needed to rapidly create and test long range wireless data links.
United States & Canada
- Part Number: XT09-DK
Australia
- Part Number: XTH9-DK
30-Day Satisfaction Guarantee
Each development kit includes free and unlimited access to MaxStream’s knowledgeable and responsive team of RF XPerts™. MaxStream RF XPerts are available to help customize your wireless data network to meet your specific needs. If after contacting MaxStream engineers you find the development kit does not meet your product needs, return it in good working condition within 30-days for a full refund (less shipping & handling).
| Performance | |
|---|---|
| Power Output: | 1 mW - 1 Watt (0 - 30 dBm), software selectable |
| Indoor/Urban Range: | up to 3000' (900m) |
| Outdoor/RF Line-of-sight Range: | up to 40 miles (64 km) |
| RF Data Rate: | 9.6 or 115.2 Kbps |
| Interface Data Rate: | up to 230.4 Kbps |
| Receiver Sensitivity: | -110 dBm (@ 9600 bps) |
| Networking | |
| Spread Spectrum Type: | FHSS (Frequency Hopping Spread Spectrum) |
| Networking Topology: | Peer-to-peer, point-to-point, point-to-multipoint & multidrop |
| Error Handling: | Retries & acknowledgements, multiple transmissions |
| Filtration Options: | VID (Vendor ID Number), channels and addressing |
| Channel Capacity: | 10 hop sequences share 50 frequencies |
| Addressing: | 65,000 network addresses available for each channel |
| Encryption: | 256-bit AES |
| Power | |
| Supply Voltage: | 2.8 - 5.5 VDC regulated |
| Transmit Current: | 730 mA (@ 5V, 1W TX Power Output) |
| Receive Current: | 80 mA (@ 5V, 1W TX Power Output) |
| Power-down Sleep Current: | 1 µA |
| General | |
| Frequency Band: | 902 - 928 MHz |
| Serial Data Interface: | 3V - 5V CMOS UART - No configuration required |
| Physical Properties | |
| Size: | 1.44" x 2.38" x 0.20" (3.65 cm x 6.05 cm x 0.51 cm) |
| Weight: | 0.64 oz. (18 g) |
| Antenna Options: | RPSMA or MMCX connections |
| Operating Temperature: | -40 to 85° C (industrial) |
| Certifications: | |
| FCC: | OUR-9XTEND |
| IC: | 4214A-9XTEND |
| Europe: | ~ |
| Class 1 Division 2: | Approved |
- (1) XTend OEM RF module with RPSMA connector
- (1) XTend OEM RF module with MMCX connector
- (1) 1/2 wave dipole antenna with RPSMA connector
- (1) 1/2 wave dipole antenna with MMCX connector
- (2) RS-232 / RS-422 / RS-485 PC serial interface boards
- (2) DSub-9 serial cables
- (2) 9V 1A power adapters
- (1) Serial loopback adapter
- (1) Male-to-male null modem adapter
- (1) Female-to-female null modem adapter
- (1) DB-9 male to RJ-45 female adapter
- (1) DB-9 female to RJ-45 female adapter
- (1) CD with X-CTU™ test/config utility software, manuals and documentation