LPC-E2124 BOARD WITH ETHERNET INTERFACE FOR LPC2124 ARM7TDMI-S MICROCONTROLLER
 

FEATURES:

• MCU: LPC2124 16/32 bit ARM7TDMI-S™ with 256K Bytes Program Flash, 16K Bytes RAM, RTC,4x 10 bit ADC 2.44 uS, 2x UARTs, I2C, SPI, 2x 32bit TIMERS, 7x CCR, 6x PWM, WDT, 5V tolerant I/O, up to 60MHz operation
• CS8900 Ethernet interface
• two general purpose buttons
• potentiometer connected to analog input 0
• Dallas i-button interface
• 24LC515 EEPROM for external web storage
• standard JTAG connector with ARM 2x10 pin layout for programming/debugging with ARM-JTAG
• two on board voltage regulators 1.8V and 3.3V with up to 800mA current
• single power supply: +5VDC required
• three LAN status LEDs, three general purpose status LEDs
• power supply filtering capacitor
• USB to RS232 interface
• RESET circuit with exterman control of Philips ISP utility via USB/RS232
• RESET button
• DBG jumper for JTAG enable
• BSL jumper for bootloader enable
• JRST jumper for enable/disable external RESET vontrol by RS232
• 14.7456 Mhz crystal
• extension header for all uC ports
• PCB: FR-4, 1.5 mm (0,062"), green soldermask, white silkscreen component print
• Dimensions: 80x90 mm (3.15x3.55")

  Back to Olimex Main Page    |    Back to Testech Home Page    |    Compiler    |     RTOS    |    Emulator/Debugging