LPC-MT-2106 DEVELOPMENT BOARD FOR LPC2106 ARM MICROCONTROLLER

FEATURES:

• MCU: 16/32 bit LPC2106 with 128K Bytes Program Flash, 64K Bytes RAM, RTC, 2x UARTs, I2C, SPI, 2x 32bit TIMERS, 7x CCR, 6x PWM, WDT, 5V tolerant I/O, up to 60MHz operation
• JTAG connector as per ARM's 2x10 pin layout, ARM-JTAG (Wiggler) compatible
• 14.7456 Mhz crystal allow easy communication setup (4x PLL = 58,9824 Mhz CPU clock)
• RS232 interface circuit with SUB-D 9 pin connector
• LCD16x2 display
• five buttons
• Dallas iButton port
• Frequency input
• Relay with 10A/250VAC contacts
• Buzzer
• Status LED
• RESET circuit
• RESET button
• Bootloader enable jumper and pullup
• DEBUG jumper for JTAG enable/disable
• RTCK pullup resistors
• Power plug-in jack
• power supply: 6VAC/+9VDC
• three on board voltage regulators 1.8V, 3.3V and 5V
• power supply filtering capacitor
• Four mounting holes
• PCB: FR-4, 1.5 mm (0,062"), green soldermask, white silkscreen component print
• Dimensions: 120x38 mm (4.75x1.5")

  Back to Olimex Main Page    |    Back to Testech Home Page    |    Compiler    |     RTOS    |    Emulator/Debugging