There is ample flexibility when configuring the card in order to adapt it to a PC/104 system, since there are 14 different port addresses and eight interrupt assignments from which to choose. Two Philips SJA1000 CAN controllers are used. For ease of installation the port addresses available to the user are 200H to 3A0 and the hardware interrupts are IRQ3, IRQ4, IRQ5, IRQ7, IRQ10, IRQ11, IRQ12 and IRQ15. They can be set by means of jumpers. Multiple PCAN-PC/104 cards can be operated without problem (interrupt sharing).

The PCAN-PC/104 card package includes software and sources for in-house programming.

• Baud rate settings up to 1 MBaud
• Two can be configured totally independently SJA1000 CAN controller with 16 MHz clock frequency
• 82C251 CAN transceiver
• 100 % PC/104 compatible
• CAN bus connection via Sub-D, 9-pin
  (to CiA DS102-1)
• Hardware can be reset via software
• Multiple PC/104 cards can be operated in parallel (interrupt sharing)
• Choice of 14 different port addresses and eight different interrupt addresses

Optional:

• Electrical isolation to 500 V
• Also available in a dual-channel version

Designation

• PC/104 plug-in card
• PCAN-View CAN monitor for WIN 9x/ME and NT/2000/XP
• PCANView for DOS
• Device drivers (sys, VxD) and interface DLL for WIN 9x/ME and NT/2000/XP
• Diskette containing PCAN-Light software interface DLL for driving
• Diskette containing sample program with source code in VB,
  BB5 and VC
• LINUX driver incl. source code available at no cost
• Diskette containing manual in PDF format