PCAN-USB

PC USB to CAN interface

    
 
For easy and cost-effective integration into 2.0A and 2.0B CAN networks operating at a maximum baud rate of 1 Mbit/s.
With its compact plastic casing, the USB-to-CAN converter is ideally suited for use with laptops and notebooks. Software and in-house programming sources are supplied to make the package complete.

The USB-ISO version also includes optical decoupling. Built-in DC/DC converters and optical couplers provide

electrical isolation to a maximum of 500 V between the PC and the CAN network.
 
   
Pin assignment 9-pole connector male:   Pin Configuration
  1 +12 V / +5 V / Not connected
  2 CAN-L
  3 CAN-GND / Not connected
  4 Not connected
  5 Not connected
  6 CAN-GND / Not connected
  7 CAN-H
  8 Not connected
  9 +12 V / +5 V / Not connected
       
 
Specifications
  • Baud rate settings up to 1 MBit/s
  • PHILIPS SJA1000 CAN controller,
    16 MHz clock frequency
  • 82C251 CAN transceiver
  • Compliant with CAN specifications 2.0A (11-bit ID) and 2.0B (29-bit ID)
  • SJA1000 hardware can be reset via software
  • Supplied in space-saving plastic casing with USB cable to 9-pin DIN (CAN)
  • CAN bus connection via Sub-D, 9-pin
    (to CiA DS102-1)

For PCAN-USB ISO only:

  • Electrical isolation to 500 V
   
 
Ordering information
Designation Art. No.
PCAN-USB IPEH-002021
PCAN-USB ISO IPEH-002022
 
Scope of supply
  • Interface in compact plastic casing
  • Voltage supply via USB bus
  • PCAN-View CAN monitor for WIN 98/ME and 2000/XP
  • Device drivers (sys, VxD) and interface DLL for Win 98/ME
    and 2000/XP
  • Diskette containing PCAN-Light software interface DLL for
    driving Diskette
  • containing sample program with source code in VB, Delphi and VC
  • LINUX driver available at no cost
  • Diskette containing manual in PDF format

 

 

 

  Back to Peaksystems Main Page    |    Back to Testech Home Page    |    Compiler    |     RTOS    |    Emulator/Debugging