|
-
Sturdy, watertight,
easy to install
-
Widescreen graphic
display: instant measurements, trend line, calibration state
-
Quick and simple
intuitive programming
-
4-20 mA outputs,
programmable relays
|
Technical Specifications |
| Ranges |
0.00-20.00 or 0.0-200.0 NTU |
| Measurement accuracy |
±0.5%
of the displayed value |
| Temperature measurement range |
-10.00 to +50.00°C |
| Temperature measurement accuracy (°C) |
±0.1°C |
| Casing |
ABS |
| Protection |
IP 65 |
| Operating temperature |
-25°C to
+55°C |
| Dimensions (L x W x D) / Weight |
173 x 195 x 103 / 1.5kg |
| Display |
Widescreen back-lit graphic display:
240 x 128 pixels (108 x 58mm) |
| Power supply |
230/115 VAC 60Hz, Optional: 24Vdc |
| Max power consumption |
10VA |
| |
|
| 4-20mA outputs |
2 galvanic
isolation outputs (max load 700ohms):
-Adjustable from
0.00 to 20.00 NTU or from 0.0 to 200.0 NTU
-Adjustable from
-10.00°C to +50.00°C |
| Relay outputs |
2 relays that can
be configured in 2 different modes:
-Adjustment in
alarm mode (1 NTU and 1 temperature (°C)
threshold)
-Adjustment in
adjustment mode (2 NTU thresholds) |
Simple, sturdy and
reliable like its legendary predecessor, the APF series, with
additional digital intelligence and leading-edge technology.
Fields of application:
The nephelometric turbidimeter is intended for the continuous
monitoring of drinking water or low turbidity water.
Its temperature-regulated sensor is equipped with an infrared
emitting cell and two receptor cells. The measurement is not
dependent on light fluctuations, and the specially designed probe
(specific geometry and materials) completely eliminated residual
infrared absorption.
The ACTEON 2056 unit comes with a PONCIR-NTU20-10 optical infrared
sensor.
Nephelometric and
temperature sensor:
| IR nephelometric sensor:
PONCIR-NTU-20-10: |
 |
| Measurement principle: By
absorption at 180° and diffusion at
90° |
| Length: 284m |
| Weight: 1kg |
| Material: PVC |
| Protection: IP68 |
| Max pressure: 10 bars |
| Temperature compensation (°C):
Automatic, by NTC thermistor from +50 to
+30°C |
| Emission wavelength: 880mm
(infrared) |
| Cable: Multiple coated wires,
polyurethane sheath. 10m standard length
(up to 100m on request) |
| |
| Installation options:
Fixed sensor-holder perch for in-pipe installations. |
| |
Temperature Sensor:
Delrin, Stainless steel, Silicone - IP68
Dimensions: Diameter 3mm (sensor), Length 115mm
Weight: 40g
Cable: 10m standard length
Accessories for
electronic unit installation:
|
