|
-
Sturdy, watertight,
easy to install
-
Widescreen graphic
display: instant measurements, trend line, calibration state
-
Quick and simple
intuitive programming
-
4-20 mA outputs,
programmable relays
| Technical
Specifications |
| Suspended solids measurement range |
0.0 to 20.00g/L or 0.00 to 50.00g/L |
| Suspended solids measurement
accuracy |
±0.2/l
[0.00-20.00g/l] / ±0.2g/l [0.00-20.00 and ±0.5 20.00-50.00g/l] |
| Temperature measurement range |
-10.00 to +50.00°C |
| Temperature measurement accuracy (°C) |
±0.1°C |
| Casing |
ABS |
| Protection |
IP 65 |
| Operating temperature |
-25°C
to +55°C |
| Display |
173 x 195 x 103mm / 1.5kg |
| Power supply |
230/115Vac 60Hz, Optional: 24Vdc |
| Max power consumption |
10VA |
| 4-20mA outputs |
2 galvanic
isolation outputs (max load 700ohms):
-Adjustable from
0.00 to 20.00g/L or from 0.00 to 50.00g/L
-Adjustable from
-10.00°C
to +50.00°C |
| Relay outputs |
2 relays that can
be configured in 3 different modes:
-Adjustment in
alarm mode (1 suspended solids and 1 temperature (°C)
threshold
-Adjustment on 1 High threshold/Low
threshold relay - forced Start-up/Shutdown |
The standard ACTEON 2050 unit comes with a MES5 sensor with a
10-meter cable connection.
Simple, sturdy and reliable like its legendary predecessor, the APF
series, with additional digital intelligence and leading-edge
technology.
Fields of application:
Using the new ACTEON 2050 as a fixed unit optimizes the measurement
and regulation processes of suspended solids in following fields:
- Wastewater treatment, (input/output controls, aeration and
anoxic tanks, sludge return, etc.)
- Industrial effluent treatment (input/out controls, biological
treatment regulations, etc.)
Suspended solids
sensor: PONCIR-MES5-10
| Measurement principle: Optical absorption of
infrared light, regulated and |
 |
| pulsed emission (10Hz frequency) |
| -Dimensions: Length: 195.5mm |
| -Weight: 1kg |
| -Materials: PVC and special glass, IP68 |
| -Temperature compensation (°C):
automatic per CTN of +5 to +30°C |
| -Emission wavelength: 950mm (infrared) |
| -Cable: Multiple coated wires,
polyurethane sheath. 10m standard length (up to 100m on request) |
| |
| Installation options: Fixed
sensor-holder perch, accessories for in-pipe installation. |
| |
The MES 5 optical sensor
consists of three parts:
The head of the sensor
The sensor is cylindrical and has a diametral cavity with parallel
walls (optical length 5mm). Two quartz disks mounted on ring-type
joints let through the radiation and protect the different diodes.
This assembly absorbs thermal shocks and allows the sensor to
operate up to 100°C.
The body of the sensor
Equipped with a sent of electronic boards, diode feeds and signal
and amplification processors, the body of the sensor can be
positioned up to 100m from the transmitter sensor.
The sleeve
This is where the electronic boards are connected to the coated
cable.
A cable gland is used to keep it watertight.
Temperature Sensor:
- Delrin, Stainless steel, Silicone - IP68
- Dimensions: Diameter 3mm (sensor), Length 115mm
- Weight: 40g
- Cable: 10m standard length
Accessories for electronic unit
installation:
Accessories for sensor
installation in tanks and open canals:
Accessories for
in-pipe installation:
|
