Serial Interface Port
Connector Type...................... DB-9
Voltage Levels.........................RS-232 or CMOS std.
                                                RS485 or RS422 optional
RX and TX data.......................Transparent Async
Word length..............................7 or 8 bits
Format......................................N, O, or E
Modem handshake signals.........RTS, CTS, CD

AT Commands
AT commands are available for the following functions:
Channel Number and frequency
Carrier Detect Operation
Modem Statistics
Unit Address
Destination address
Network Address Mask
Number of Retries
Baud Rate, parity, stop bits
Preamble-length
Power-saving modes
ARQ error correction on/off
Select Packet or Streaming mode
Store-and-forward Repeating on/off
Store-and-forward address range
Busy-channel lock out
Hardware flow control operation
LEDs operation or disable
Read Serial Number
Set maximum packet size
Auto Status report on/off and interval.

Back to Raveon Main Page    |    Back to Testech Home Page    |    Wireless Modules